Earthquaker Devices The Depths V2 NEW W/ WARRANTY! FREE PRIORITY S&H IN U.S.!

Description

FREE
insured USPS Priority Shipping in the U.S.!
We are an
Authorized Earthquaker Devices Dealer
.
Thank you for checking out our sale here for a
BRAND NEW in box with manufacturer’s warranty
Earthquaker Devices
The Depths
V2
.
The Depths is our take on the classic optical vibe circuit.
Now you can swab the decks with the same lush, pulsating, three-dimensional
swirling sound you know and love, with some modern accouterments for all you
land-lubbers out there.
The Depths is optimized for use with all kinds of
instruments, pickups, and to play well with dirt, so nobody’s left waiting on
shore. If it’s got a ¼” output, plug it in and get deep!
Controls
1. Intensity: This controls how subtle or intense the
overall effect is. Counterclockwise from noon are the more subtle, classic
sounds. Clockwise from noon are the more drastic and intense sounds.
2. Voice: Dials in the overall sound. Turn it clockwise for
a fuller sound with more lows, bring it back for a thinner, more midrange
focused tone.
3. Rate: Controls the speed of the effect. Counterclockwise
for slow, clockwise for fast.
4. Level: Controls the volume of the effect. Unity is around
1 o’clock, everything above that is boost.
5. Throb: This controls the low end pulse. It may not be
immediately evident on the bridge pickup, but switch to the neck or add some
dirt and it comes alive. All the way up for more throb, dial it back for less.
Works best when the Voice is set to a warmer tone.
Tech Specs
Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with
knobs
Current Draw: 21 mA
Input Impedance: 1 MΩ
Output Impedance: <1 kΩ
Flexi-Switch® Technology
This device features Flexi-Switch® Technology! This
relay-based, true bypass switching style allows you to simultaneously use
momentary and latching style switching.
For standard
latching operation, tap the footswitch once to activate the effect and then tap
again to bypass.
For momentary
operation, hold the footswitch down for as long as you’d like to use the
effect. Once you release the switch the effect will be bypassed.
Since the switching is relay based, it requires power to
pass signal.
Power
This device takes a standard 9-18 volt DC power supply with
a 2.1mm negative center barrel. We always recommend pedal-specific,
transformer-isolated wall-wart power supplies or multiple isolated-output
supplies. Pedals will make extra noise if there is ripple or unclean power.
Switching-type power supplies, daisy chains and non-pedal specific power
supplies do not filter dirty power as well and let through unwanted noise. DO
NOT RUN AT HIGHER VOLTAGES!
Feel free to call or email with any questions before buying. Check out our excellent feedback record and buy with confidence! Thank you very much!